Overclock information technology is the term in English which refer to ways to create a device to run at speeds higher than the provision of the device. The principle is to create a higher performance. But this treatment are at risk of causing system stability is reduced to the destruction of computer peripherals dioveclock. Overclock generally practiced by the user's PC to "force" the computer peripherals working ability over the standard pabrikannya determined with the final goal to improve the performance of the computer.
PC devices are the same overclock with the ability to exceed original forced. However, this overclock your PC, create a device other than the system unstable, can create damage to the hardware, especially the mainboard, hard disk, and processor.
Fortunately now many of the hardware that is made with the manufacturing that has been reliable for the purpose of overclocking, so if the insight and experience of overclocking, the damage at the time overclocking can diminimaliasi.
The decreasing level of stability can overclock a PC because of poor quality due to the power supply unit (PSU), memory, and / or mainboard. To avoid instability is try to replace the power supply with high quality and adequate resources, the memory of good quality and reliable, a good motherboard with a full bios. For hardware with adequate and good quality for dioverclock expensive does not always valuable.
Damage the hardware, especially because dioverclock caused by excessive heat to avoid the many ways that can be done to improve the system such as the flow of air in the casing, to improve the heatsinks cpu / chipset / vga way Lapping or even replace it with a quality refrigerator that is now sold in many shops machines in Indonesia. Cooling systems have many macamnya such as HSF (Heat Sink Fan) standard is used where the public comes from the cooling fan (Fan), Cooling Water, to the extreme, such as using a bong and dry ice or peltier.
PC devices are the same overclock with the ability to exceed original forced. However, this overclock your PC, create a device other than the system unstable, can create damage to the hardware, especially the mainboard, hard disk, and processor.
Fortunately now many of the hardware that is made with the manufacturing that has been reliable for the purpose of overclocking, so if the insight and experience of overclocking, the damage at the time overclocking can diminimaliasi.
The decreasing level of stability can overclock a PC because of poor quality due to the power supply unit (PSU), memory, and / or mainboard. To avoid instability is try to replace the power supply with high quality and adequate resources, the memory of good quality and reliable, a good motherboard with a full bios. For hardware with adequate and good quality for dioverclock expensive does not always valuable.
Damage the hardware, especially because dioverclock caused by excessive heat to avoid the many ways that can be done to improve the system such as the flow of air in the casing, to improve the heatsinks cpu / chipset / vga way Lapping or even replace it with a quality refrigerator that is now sold in many shops machines in Indonesia. Cooling systems have many macamnya such as HSF (Heat Sink Fan) standard is used where the public comes from the cooling fan (Fan), Cooling Water, to the extreme, such as using a bong and dry ice or peltier.
0 komentar:
Posting Komentar